DeviceNet Thin Cable
“Thin” cables are designed to connect sensors, actuators and switching to the DeviceNet™ backbone (Thick cable) on the Allen Bradley DeviceNet™ system. Similar in construction to the backbone cable, the “Thin” cable incorporates a power and data pair. Several sheathing options are available for different installation environments. These cables are also referred to as DeviceNet™ Drop cables.
- Power and data pair
- Several sheathing options available
Construction:
Power pair – Tinned copper conductors 22AWG (0.34mm² approx), PVC insulation, aluminium foil screen.
Data pair – Tinned copper conductors 24AWG (0.22mm² approx), foamed PE insulation, aluminium foil screen.
Lay-Up – Pairs laid up with a common 22AWG (0.34mm² approx) tinned copper drain wire, overall tinned copper wire braid – 65% optical coverage, PVC or CPE sheath.
Allen Bradley DeviceNet™ is a Rockwell automation system supported by ODVA.
Image representative of product style, product supplied may vary.
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab Emirates| Voltage Rating: | 150V | |
| Temperature Rating: | ||
| Fixed: | -20°C to +70°C | |
| Flexing: | 0°C to +70°C | |
| Nominal Impedance: | 100-120 Ohms | |
| Capacitance @ 1hz: | 40pF/m | |
| Conductor Resistance @ 20°C: | ||
| Power Pair | 57.4/Ohms/km | |
| Data Pair | 91.0/Ohms/km | |
| Bending Radius: | ||
| Fixed | 7.5 x cable diameter | |
| Flexing | 15 x cable diameter | |
| Colour Code: | ||
| Power Pair | Black & red | |
| Data Pair | Blue & white | |
| Velocity of Propagation: | 75% (Data Pair) | |
| Nominal Attenuation: | kHz | dB/100m |
| 125 | 1.0 | |
| 500 | 1.6 | |
| 1Mhz | 2.3 |
CFS-TCWB - Collective Foil Screen, Tinned Copper Wire Braid
RELATED PRODUCTS
FieldBus Type B Cable
A single pair 22AWG Bi-Directional digital Databus Foundation Fieldbus cable for type B applications (31.25 KBits/sec).
The FS Cables Databus Foundation Fieldbus Type B cable is available in PVC, LSHF and SWA versions.
Image representative of product style, product supplied may vary.
- Suitable for Fieldbus Type B applications
- PVC or LSZH
- External grade versions also available
HF-120 Unscreened Cable
Hi-Flex 120 data cables are designed to last even in the most hostile chain or free movement applications. Abrasion is reduced to a minimum by using a Polyurethane low friction sheath. For maximum life Hi-Flex Data cables should not be exposed to torsional stresses or twisting. Many sizes now available with UL approval.
Image representative of product style, product supplied may vary.
- Low friction polyurethane sheath for abrasion resistance
- Fleece tapes and talcum to strengthen the core bundle
- Wide range of sizes
- For flexing applications
HF-120C-TP Paired Screened Cable
The Hi-Flex twisted pair data cable is ideally suited to mechanically challenging data transmission applications. The tough Polyurethane jacket is cut and abrasion resistant, while being unaffected by many solvents and oils. The tinned copper braid screen copes well with frequent flexing and at the same time maintains signal integrity by minimising the efforts of electromagnetic interference.
Hi-Flex HF-100 Unscreened Cable
Abrasion on cables that are constantly flexing is becoming a much more widespread problem. To overcome this, FS Cables have introduced the HF-100 range of polyurethane sheathed cables which will outlast conventional PVC sheathing.
- Low friction polyurethane sheath for abrasion resistance
- Fleece tapes and talcum to strengthen the core bundle
- Wide range of sizes
Modbus Cable
Developed by Modicon, Modbus provides a master/slave communication between intelligent automation devices. Based on Belden 9841, the Modbus cable has an increased jacket thickness to ensure a correct termination into the Modbus connectors.
CPR-Compliant options are available for this cable and are indicated in the product table. For the latest information on CPR for Cables, you can visit our dedicated CPR Explained web page. We have created a series of short CPR videos to break down all the significant areas and have updated our 'CPR for Cables' guide, available for you to download..
Image representative of product style, product supplied may vary.
- CPR-Compliant options
- Suitable for Modbus systems
- PVC, LSZH or external grade versions available
Reviews
There are no reviews yet.