KNX Cable
The KNX cable from FS Cables (also known as TP1 cable) features two twisted pairs of solid conductor with a foil screen and tinned copper drain wire in a green LSHF jacket. It has been tested and certified as being suitable for use in KNX systems and bears the KNX logo.
- CPR-compliant up to Class Cca s1a, d1, a1
- Certified by the KNX Association
- PVC, LSZH, duct grade & armoured versions
- London Underground (LU) approved version
The LU approved KNX cable has passed the latest London Underground requirements and has been independently tested by the BRE-Global Ltd (Building Research Establishment). It can be identified by the distinctive white stripe over the green sheath.
Many of our KNX cables have been tested for compliance to the Construction Products Regulation (CPR). The 2 pair green KNX cable has been classified to Class Cca s1a, d1, a1.
Also offered is a duct grade, armoured and white version.
KNX systems, formerly known as EIB, allow the operation and control of heating, lighting and air condition among others to be aligned with external climate conditions or adjusted by an interface to pre-set levels.
When you are looking to buy KNX cable, look for the KNX logo. All KNX certified equipment has been tested and certified to meet this high standard and only equipment meeting this can carry the logo. This ensures the quality, reliability and guaranteed compatibility of all KNX devices and equipment.
CPR-Compliant options are available for this cable and are indicated in the product table. For the latest information on CPR for Cables, you can visit our dedicated CPR Explained web page. We have created a series of short CPR videos to break down all the significant areas and have updated our ‘CPR for Cables’ guide, available for you to download.
Image representative of product style, product supplied may vary.
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab EmiratesRELATED PRODUCTS
CAN Bus Cable
CAN Bus (Control Area Network) is a non-addressable system that treats all devices as equal allowing for fast transmission of data. Due to its robust nature, it has been widely adopted in the automotive industry. While all the types listed below are for high flexing automation applications, static versions can also be supplied.
Image representative of product style, product supplied may vary.
- UR sheath for high flexing automation applications
- Distinctive violet jacket
- Fast data transmission across CAN Bus system
Echelon LonWorks 22AWG Cable
Designed for use on industrial and commercial bus systems, these cables have become increasingly popular on Building Management Systems (BMS). Available as one and two pair cables, screened and unscreened in Low Smoke Halogen Free compounds they provide the ideal low cost solution to BUS wiring.
CPR-Compliant options are available for this cable and are indicated in the product table. For the latest information on CPR for Cables, you can visit our dedicated CPR Explained web page. We have created a series of short CPR videos to break down all the significant areas and have updated our 'CPR for Cables' guide, available for you to download.
Image representative of product style, product supplied may vary.
- CPR-Compliant options
- For popular Lonworks BMS system
- LSZH jacket ideal for installations in public buildings
HF-275 PUR Servo & Feedback Cable
Cables combining control, signal and power cores are now commonly used in industrial automation. Fine copper wire strands with high performance insulation and sheathing material make them ideal for regular flexing applications. A wide variety of core combinations are manufactured as standard but please call us to discuss your specific needs. We are constantly increasing the standard range and will produce special designs for low minimum order quantities.
Image representative of product style, product supplied may vary.
- Low friction polyurethane sheath for abrasion resistance
- Fleece tapes and talcum to strengthen the core bundle
- High levels of screening
- Wide range of sizes
Industrial Ethernet cable
Through the use of Category 5E style cables Industrial Ethernet provides a stable platform for linking automation systems and workstations. They are also suitable for interlinking different Bus protocols such as Profibus and Interbus.
The use of finely stranded conductors and PUR sheathing compounds makes them ideal for frequent flexing and dynamic applications.
Image representative of product style, product supplied may vary.
- Highly flexible
- Finely stranded conductors and PUR sheath
- Ideal for flexing applications
- Cat 5E data rates
- Oil Resistant
Interbus Cable
The Interbus open ring topology allows integration of different field devices from control level down to sensor switches over one system. Unlike traditional ring systems Interbus uses one cable to route data back and forth to all devices. Each device or unit will amplify the signal before sending it on to the next station. The data is transmitted over a 3 pair screened cable. For remote applications a composite data and power cable is available.
Image representative of product style, product supplied may vary.
- PVC jacket for static applications
- PUR version available for flexing applications
- 3 pair or 3 pair + power
Reviews
There are no reviews yet.