FEATURED PRODUCTS
0.3m Cat 6 U/UTP LSHF Patch Lead
The TruAccessories range of Cat 6 U/UTP LSHF patch leads for network/data cabling are available in 13 lengths, from 0.3 meters to 20 meters and in 10 different colours for easy identification.
Offered in black, blue, red, white, grey, violet, pink, orange, yellow and green, this 0.3 meter Category 6 patch lead is Low Smoke Halogen Free (LSHF); suitable for installations in public buildings, data centres, computer rooms, server rooms and other applications where fire safety is critical.
- Flush moulded strain relief boot
- 10/100/1000 BaseT gigabit ethernet
- 24AWG stranded plain copper
- 10 colours for easy identification
0.3m Cat 6A S/FTP LSHF Patch Lead
The TruAccessories range of Cat 6A S/FTP LSHF patch leads for network/data cabling are available in 10 lengths, from 0.3 meters to 20 meters and in 10 different colours for easy identification.
Offered in black, blue, red, white, grey, violet, pink, orange, yellow and green, this 0.3 meter Category 6A patch lead is Low Smoke Halogen Free (LSHF); suitable for installations in public buildings, data centres, computer rooms, server rooms and other applications where fire safety is critical. The lead features an overall wire braid and individually screened pairs to minimise interference and maintain fast data transmission. Useable for Power over Ethernet (PoE+).
- Flush moulded strain relief boot
- 10/100/1000 BaseT gigabit ethernet
- 26AWG stranded plain copper
- 10 colours for easy identification
0.5m Cat 6 U/UTP LSHF Patch Lead
The TruAccessories range of Cat 6 U/UTP LSHF patch leads for network/data cabling are available in 13 lengths, from 0.3 meters to 20 meters and in 10 different colours for easy identification.
Offered in black, blue, red, white, grey, violet, pink, orange, yellow and green, this 0.5 meter Category 6 patch lead is Low Smoke Halogen Free (LSHF); suitable for installations in public buildings, data centres, computer rooms, server rooms and other applications where fire safety is critical.
- Flush moulded strain relief boot
- 10/100/1000 BaseT gigabit ethernet
- 24AWG stranded plain copper
- 10 colours for easy identification
0.5m Cat 6A S/FTP LSHF Patch Lead
The TruAccessories range of Cat 6A S/FTP LSHF patch leads for network/data cabling are available in 10 lengths, from 0.3 meters to 20 meters and in 10 different colours for easy identification.
Offered in black, blue, red, white, grey, violet, pink, orange, yellow and green, this 0.5 meter Category 6A patch lead is Low Smoke Halogen Free (LSHF); suitable for installations in public buildings, data centres, computer rooms, server rooms and other applications where fire safety is critical. The lead features an overall wire braid and individually screened pairs to minimise interference and maintain fast data transmission. Useable for Power over Ethernet (PoE+).
- Flush moulded strain relief boot
- 10/100/1000 BaseT gigabit ethernet
- 26AWG stranded plain copper
- 10 colours for easy identification
1.5m Cat 6 U/UTP LSHF Patch Lead
The TruAccessories range of Cat 6 U/UTP LSHF patch leads for network/data cabling are available in 13 lengths, from 0.3 meters to 20 meters and in 10 different colours for easy identification.
Offered in black, blue, red, white, grey, violet, pink, orange, yellow and green, this 1.5 meter Category 6 patch lead is Low Smoke Halogen Free (LSHF); suitable for installations in public buildings, data centres, computer rooms, server rooms and other applications where fire safety is critical.
- Flush moulded strain relief boot
- 10/100/1000 BaseT gigabit ethernet
- 24AWG stranded plain copper
- 10 colours for easy identification
BEST SELLERS
Nylon Cable Gland Kit – Glands M16-M32
The Nylon Cable Gland Kit contains 75 individual pieces (glands M16-M32) and is offered in either black or light grey options. These gland kits have been designed with the installer in mind to make the use of glands in everyday applications as easy as possible. All comes packed in a sturdy box with 13 separate compartments, providing the end user with a handy solution to storage and transporting the glands while on site.
Each individual item within the box can be purchased from the Cablecraft website, making it very easy to restock.
- Manufactured to the requirements of BS EN 50262
- UL, CSA and VDE approved
- 75 individual Pieces
Plastic Atex Cable Gland
Plastic ATEX rated glands provide increased safety protection through rubber seals and special designed threads. All are marked with the ATEX logo and safety levels for ease of identification.
These glands are designed for use on unarmoured cables, other colours and thread types can be supplied upon request. IP68 rated, temperature rating -30°C to +80°C
- ATEX rated
- Non-conductive
- Lightweight
E1Xe ATEX Hazardous Area Cable Glands
E1Xe IP66 ATEX rated indoor/outdoor brass glands terminate braid and tape armours to provide a seal on to the inner and outer sheath of the cable for additional protection. -60°C to +150°C rated.
- High quality brass body
- Nickel plated versions available
- Gland for SWA armoured cable
- Doubel seal
- ATEX rated
CXe ATEX Hazardous Area Cable Glands
CXe brass ATEX rated glands are ideal for terminating steel wire braid or steel tape armoured cables. These IP66 rated indoor/outdoor glands terminate the armour and provide a seal on the outer sheath of the cable. -60°C to +150°C rated.
- High quality brass body
- Nickel plated versions available
- Gland for unarmoured cable
- ATEX rated
CWe ATEX Hazardous Area Cable Glands
CWe brass ATEX rated glands are ideal for anchoring the steel wire armour (SWA) on power, data and instrumentation cables. These IP66 rated indoor/outdoor glands terminate the armour and provide a seal on the outer sheath of the cable. -60°C to +150°C rated
- High quality brass body
- Nickel plated versions available
- Gland for unarmoured cable
- ATEX rated
Alternative to Belden
The main benefit of using
an Belden equivalent cable
is significant cost reduction
compared to the brand name.
an Belden equivalent cable
is significant cost reduction
compared to the brand name.
BELCABLE EXCLUSIVEs
Alternative to Belden 9207 Twin-Ax Cable
Twin-Axial cables were originally developed for I/O switching & process control applications. Now widely used in commercial applications such as building management systems. Most types are also stocked in Low Smoke Halogen Free versions as well as PVC. Low Smoke Halogen Free versions are available where indicated. The insulation and sheath materials are replaced by those that do not emit halogens and toxic smoke.
- High quality alternative to genuine Belden
- Cut to length required
- PVC or LSZH sheath
Alternative to Belden 9272 Twin-Ax Cable
Twin-Axial cables were originally developed for I/O switching & process control applications. Now widely used in commercial applications such as building management systems. Most types are also stocked in Low Smoke Halogen Free versions as well as PVC.
- High quality alternative to genuine Belden
- Cut to length required
- PVC or LSZH sheath
Alternative to Belden 9463 Twin-Ax Cable
Twin-Axial cables were originally developed for I/O switching & process control applications. Now widely used in commercial applications such as building management systems. Most types are also stocked in Low Smoke Halogen Free versions as well as PVC.
- High quality alternative to genuine Belden
- Cut to length required
- PVC or LSZH sheath
BEST SELLERS
TNC Reverse Polarity Connectors
The Antennax range of connectors are designed specifically to offer the best connection possible and easy termination of our Antennax coaxial cables.
These connectors are a fast, simple solution to cable termination and minimise labour time significantly during installation. The connectors feature a gold-plated, solderless centre pin, designed to clamp around the conductor without the need to solder or crimp.
- Designed to suit Antennax range of broadcast coax
- Fast, simple solution
- Minimises labour time during installation
- Gold-plated, solderless centre pin
SWA Polyamide Nylon Glands
Material: Polyamide 6 (halogen free) Trade name: Ultramid B
Protection Class: IP68 5 bar
Operating Temperature Range: -30°C to +80°C
Intermittent Temperature: Up to +150°C intermittent
Seal: Neoprene
Approvals: Underwriters Laboratories (UL Approval) – Cert. no: E178501(N)
Canadian standards
(CSA Approval) – Cert. no: 1454383
VDE Approval DIN EN 50262 (VDE 0619)
- Resistance to chemicals and oils
- UL Approved
PUR Unscreened Spiral Cable
Belcable offers both signal and power versions of retractable spiral cables. The variations in conductor size, insulation and sheath materials are enormous. Having decided on the conductor size and the number of cores it is important to choose the insulation and sheath materials most suitable for the task. The retracted length of the spiral can be made to your requirements up to 5m.
- Made to order
- Wide range of sizes and core options
COAXIAL CABLES
Coaxial cables to connect satellite
antenna facilities to customer
homes and businesses.
antenna facilities to customer
homes and businesses.
Coaxial Cables
Coaxial cables are the type of electrical cable consisting of an inner conductor surrounded by a concentric conducting shield.
See Coaxial Cables
FEATURED
Quick-Fit Keyhole Metal Cleat
SWA Firefly quick-fit keyhole metal cleats provide an all metal fire resistant range of cable fixings that will hold cables and cleats in place during a fire, thereby, increasing the safety of firefighters and people escaping from burning buildings.
The Firefly range of fire resistant clips and cleats covers all cable sizes from small data-comm cables to large 50mm diameter.
- Fire resistant
- BS7671 18th Edition compliant
- Strong and impact resistant
- Quick, simple & easy to install
Metal Cleat
SWA Firefly metal cleats provide an all metal fire resistant range of cable fixings that will hold cables and cleats in place during a fire, thereby, increasing the safety of firefighters and people escaping from burning buildings.
The Firefly range of fire resistant clips and cleats covers all cable sizes from small data-comm cables to large 50mm diameter.
- Fire resistant
- BS7671 18th Edition compliant
- Strong and impact resistant
- Quick, simple & easy to install
Buckle Clip
Red coated mild steel clip for fire cables and other applications. These clips can be used with a gas nail gun or with a standard masonry screw fixing.
The Firefly Buckle clip is up to 10 times quicker to install than conventional cable clipping methods and can securely hold one or two cables.
- 10x quicker than conventional clipping
- Meets cable support requirements BS 5839-1:2017
- Can hold one or two cables
- Fixing hole 5mm
Multi-Hold Multi-Use Clip
SWA Firefly fire resistant multi-hold hanger can be fixed to threaded rod or with a masonry screw. All of the SWA Firefly multi-hold clips are 100% compliant with BS 7671. This requires the use of metallic firesafe clips in the retention of overhead cabling. The failure of which may hinder access or evacuation.
Spring loaded for extra security and ease of use, Firefly multi-hold hangers are spring loaded to hold cables tighter in place in the event of fire. Being spring loaded, these versatile, high spec cable retention clips are perfect for fast installation and ease of use - and re-use, across a wide range of applications.
- BS7671 18th Edition compliant
- Melting point over 1000°C
- Multi-use
Cat 5E & Cat 6 Cable Jacket Stripper
Designed for stripping cable jackets on Cat 5E and Cat 6, this robust and economical tool ensures quick and easy cable preparation. The tool has been constructed specifically for Cat 5E and Cat 6 and is designed not to damage the inner conductors during use.
- Quick and easy cable preparation
- Designed for both Cat 5E and Cat 6
- Protects against damage to the inner conductors
- Lifelong blade
ALL PRODUCTS
E1Xe ATEX Hazardous Area Cable Glands
E1Xe IP66 ATEX rated indoor/outdoor brass glands terminate braid and tape armours to provide a seal on to the inner and outer sheath of the cable for additional protection. -60°C to +150°C rated.
- High quality brass body
- Nickel plated versions available
- Gland for SWA armoured cable
- Doubel seal
- ATEX rated
Easi-Clip Clip-On Cable Markers 5.8-8.5mm
Our Easi-Clip clip on cable markers are made from a Halogen-Free material, which are suitable for areas such as underground installations, offshore chemical industry, food production and other demanding applications. They provide cost-effective method of conveniently marking in situ on terminated cables.
- Low Smoke Halogen Free (LSHF)
- Resistance to chemicals, oils and fuels
- Packs contain 50 of each marker
316 Stainless Steel Uncoated Self-Locking Cable Ties
Our range of stainless steel uncoated cable ties are manufactured from 316 stainless steel and have a high tensile strength. The self-locking head design speeds installation and locks into place at any length along the tie.
- London Underground Approved - Certificate No. 1732
- 316 Stainless Steel
- Self-Locking Head Design
- Flame Retardant, Tough and Corrosion Resistant
Easi-Clip Clip-On Cable Markers 11.0-15.5mm
Our Easi-Clip clip on cable markers are made from a Halogen-Free material, which are suitable for areas such as underground installations, offshore chemical industry, food production and other demanding applications. They provide cost-effective method of conveniently marking in situ on terminated cables.
- Low Smoke Halogen Free (LSHF)
- Resistance to chemicals, oils and fuels
- Packs contain 50 of each marker
TNC Connectors
The Antennax range of connectors are designed specifically to offer the best connection possible and easy termination of our Antennax coaxial cables. These connectors are a fast, simple solution to cable termination and minimise labour time significantly during installation. The connectors feature a gold-plated, solderless centre pin, designed to clamp around the conductor without the need to solder or crimp.
- Designed to suit Antennax range of broadcast coax
- Fast, simple solution
- Minimises labour time during installation
- Gold-plated, solderless centre pin
