Interbus Cable
The Interbus open ring topology allows integration of different field devices from control level down to sensor switches over one system. Unlike traditional ring systems Interbus uses one cable to route data back and forth to all devices. Each device or unit will amplify the signal before sending it on to the next station. The data is transmitted over a 3 pair screened cable. For remote applications a composite data and power cable is available.
Image representative of product style, product supplied may vary.
- PVC jacket for static applications
- PUR version available for flexing applications
- 3 pair or 3 pair + power
Construction
Three Pair
Plain copper conductors 0.22mm², PE insulation, cores twisted into pairs, pairs bunched and polyester taped, copper wire braid, PVC sheath on static cables and a PUR sheath on dynamic cables.
Three Pair + Power
Data Cores
Plain copper conductors 0.22mm², PE insulated & twisted into pairs.
Power Cores
Plain copper conductors 1.0mm² PE insulation.
Cores and pairs bunched together, polyester tape, copper wire braid, PUR sheath.
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab Emirates| Voltage Rating: | 300V |
| Temperature Rating: | |
| Flexing: | -30°C +70°C |
| Static: | -5°C +50°C |
| Velocity of Propagation: | 66% (Data Pairs) |
| Capacitance: | |
| Core to shield: | 51pF/m |
| Nominal Impedance: | 100 Ohms |
| Colour Code: | |
| Pairs | Brown/white, green/yellow, pink/grey |
| Cores | Red, blue, green |
CFS-TCWB - Collective Foil Screen, Tinned Copper Wire Braid
RELATED PRODUCTS
CC-Link FieldLink Cable
Developed by Mitsubishi, CC-Link allows high speed communication between controllers and field devices. The CC-Link system is particularly popular in Asia and is used worldwide for time critical applications in conjunction with Mitsubishi Automation products. CC-Link is certified by CLPA and ensures product compatibility.
As a registered member of the CC-Link Partner Association, FS Cables offer a 3 core CC-Link cable for use on the CC-Link system, suitable for data rates up to 10MB/s, in either PVC or SWA (steel wire armoured) versions.
Image representative of product style, product supplied may vary.
- Registered member of the CC-Link Partner Association
- Suitable for data rates up to 10MB/s
- PVC or SWA for external applications
FieldBus Type A Cable
A single pair 18AWG Bi-Directional digital Databus Foundation Fieldbus cable for type A applications (31.25 KBits/sec).
The FS Cables Databus Foundation Fieldbus Type A cable is available in PVC, LSHF and SWA versions.
Image representative of product style, product supplied may vary.
- Suitable for Fieldbus Type A applications
- PVC or LSZH
- External grade versions also available
HF-120C-TP Paired Screened Cable
The Hi-Flex twisted pair data cable is ideally suited to mechanically challenging data transmission applications. The tough Polyurethane jacket is cut and abrasion resistant, while being unaffected by many solvents and oils. The tinned copper braid screen copes well with frequent flexing and at the same time maintains signal integrity by minimising the efforts of electromagnetic interference.
HF-275 PUR Servo & Feedback Cable
Cables combining control, signal and power cores are now commonly used in industrial automation. Fine copper wire strands with high performance insulation and sheathing material make them ideal for regular flexing applications. A wide variety of core combinations are manufactured as standard but please call us to discuss your specific needs. We are constantly increasing the standard range and will produce special designs for low minimum order quantities.
Image representative of product style, product supplied may vary.
- Low friction polyurethane sheath for abrasion resistance
- Fleece tapes and talcum to strengthen the core bundle
- High levels of screening
- Wide range of sizes
KNX Cable
The KNX cable from FS Cables (also known as TP1 cable) features two twisted pairs of solid conductor with a foil screen and tinned copper drain wire in a green LSHF jacket. It has been tested and certified as being suitable for use in KNX systems and bears the KNX logo.
- CPR-compliant up to Class Cca s1a, d1, a1
- Certified by the KNX Association
- PVC, LSZH, duct grade & armoured versions
- London Underground (LU) approved version
Reviews
There are no reviews yet.