Interbus Cable
The Interbus open ring topology allows integration of different field devices from control level down to sensor switches over one system. Unlike traditional ring systems Interbus uses one cable to route data back and forth to all devices. Each device or unit will amplify the signal before sending it on to the next station. The data is transmitted over a 3 pair screened cable. For remote applications a composite data and power cable is available.
Image representative of product style, product supplied may vary.
- PVC jacket for static applications
- PUR version available for flexing applications
- 3 pair or 3 pair + power
Construction
Three Pair
Plain copper conductors 0.22mm², PE insulation, cores twisted into pairs, pairs bunched and polyester taped, copper wire braid, PVC sheath on static cables and a PUR sheath on dynamic cables.
Three Pair + Power
Data Cores
Plain copper conductors 0.22mm², PE insulated & twisted into pairs.
Power Cores
Plain copper conductors 1.0mm² PE insulation.
Cores and pairs bunched together, polyester tape, copper wire braid, PUR sheath.
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab Emirates| Voltage Rating: | 300V |
| Temperature Rating: | |
| Flexing: | -30°C +70°C |
| Static: | -5°C +50°C |
| Velocity of Propagation: | 66% (Data Pairs) |
| Capacitance: | |
| Core to shield: | 51pF/m |
| Nominal Impedance: | 100 Ohms |
| Colour Code: | |
| Pairs | Brown/white, green/yellow, pink/grey |
| Cores | Red, blue, green |
CFS-TCWB - Collective Foil Screen, Tinned Copper Wire Braid
RELATED PRODUCTS
CAN Bus Cable
CAN Bus (Control Area Network) is a non-addressable system that treats all devices as equal allowing for fast transmission of data. Due to its robust nature, it has been widely adopted in the automotive industry. While all the types listed below are for high flexing automation applications, static versions can also be supplied.
Image representative of product style, product supplied may vary.
- UR sheath for high flexing automation applications
- Distinctive violet jacket
- Fast data transmission across CAN Bus system
DeviceNet Thin Cable
“Thin” cables are designed to connect sensors, actuators and switching to the DeviceNet™ backbone (Thick cable) on the Allen Bradley DeviceNet™ system. Similar in construction to the backbone cable, the “Thin” cable incorporates a power and data pair. Several sheathing options are available for different installation environments. These cables are also referred to as DeviceNet™ Drop cables.
- Power and data pair
- Several sheathing options available
FieldBus High Speed Cable
A high speed single pair 22AWG Bi-Directional digital Databus Foundation Fieldbus cable for 1.0 & 2.5MBit/sec applications. The FS Cables Databus Foundation Fieldbus High Speed cable is available in PVC, LSHF and SWA versions. Image representative of product style, product supplied may vary.
- Suitable for Fieldbus Type High Speed applications
- PVC or LSZH
- External grade versions also available
HF-120C-TP Paired Screened Cable
The Hi-Flex twisted pair data cable is ideally suited to mechanically challenging data transmission applications. The tough Polyurethane jacket is cut and abrasion resistant, while being unaffected by many solvents and oils. The tinned copper braid screen copes well with frequent flexing and at the same time maintains signal integrity by minimising the efforts of electromagnetic interference.
Modbus Cable
Developed by Modicon, Modbus provides a master/slave communication between intelligent automation devices. Based on Belden 9841, the Modbus cable has an increased jacket thickness to ensure a correct termination into the Modbus connectors.
CPR-Compliant options are available for this cable and are indicated in the product table. For the latest information on CPR for Cables, you can visit our dedicated CPR Explained web page. We have created a series of short CPR videos to break down all the significant areas and have updated our 'CPR for Cables' guide, available for you to download..
Image representative of product style, product supplied may vary.
- CPR-Compliant options
- Suitable for Modbus systems
- PVC, LSZH or external grade versions available
Reviews
There are no reviews yet.