DeviceNet Thin Cable
“Thin” cables are designed to connect sensors, actuators and switching to the DeviceNet™ backbone (Thick cable) on the Allen Bradley DeviceNet™ system. Similar in construction to the backbone cable, the “Thin” cable incorporates a power and data pair. Several sheathing options are available for different installation environments. These cables are also referred to as DeviceNet™ Drop cables.
- Power and data pair
- Several sheathing options available
Construction:
Power pair – Tinned copper conductors 22AWG (0.34mm² approx), PVC insulation, aluminium foil screen.
Data pair – Tinned copper conductors 24AWG (0.22mm² approx), foamed PE insulation, aluminium foil screen.
Lay-Up – Pairs laid up with a common 22AWG (0.34mm² approx) tinned copper drain wire, overall tinned copper wire braid – 65% optical coverage, PVC or CPE sheath.
Allen Bradley DeviceNet™ is a Rockwell automation system supported by ODVA.
Image representative of product style, product supplied may vary.
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab Emirates| Voltage Rating: | 150V | |
| Temperature Rating: | ||
| Fixed: | -20°C to +70°C | |
| Flexing: | 0°C to +70°C | |
| Nominal Impedance: | 100-120 Ohms | |
| Capacitance @ 1hz: | 40pF/m | |
| Conductor Resistance @ 20°C: | ||
| Power Pair | 57.4/Ohms/km | |
| Data Pair | 91.0/Ohms/km | |
| Bending Radius: | ||
| Fixed | 7.5 x cable diameter | |
| Flexing | 15 x cable diameter | |
| Colour Code: | ||
| Power Pair | Black & red | |
| Data Pair | Blue & white | |
| Velocity of Propagation: | 75% (Data Pair) | |
| Nominal Attenuation: | kHz | dB/100m |
| 125 | 1.0 | |
| 500 | 1.6 | |
| 1Mhz | 2.3 |
CFS-TCWB - Collective Foil Screen, Tinned Copper Wire Braid
RELATED PRODUCTS
CAN Bus Cable
CAN Bus (Control Area Network) is a non-addressable system that treats all devices as equal allowing for fast transmission of data. Due to its robust nature, it has been widely adopted in the automotive industry. While all the types listed below are for high flexing automation applications, static versions can also be supplied.
Image representative of product style, product supplied may vary.
- UR sheath for high flexing automation applications
- Distinctive violet jacket
- Fast data transmission across CAN Bus system
FieldBus Type A Cable
A single pair 18AWG Bi-Directional digital Databus Foundation Fieldbus cable for type A applications (31.25 KBits/sec).
The FS Cables Databus Foundation Fieldbus Type A cable is available in PVC, LSHF and SWA versions.
Image representative of product style, product supplied may vary.
- Suitable for Fieldbus Type A applications
- PVC or LSZH
- External grade versions also available
HF-120C-TP Paired Screened Cable
The Hi-Flex twisted pair data cable is ideally suited to mechanically challenging data transmission applications. The tough Polyurethane jacket is cut and abrasion resistant, while being unaffected by many solvents and oils. The tinned copper braid screen copes well with frequent flexing and at the same time maintains signal integrity by minimising the efforts of electromagnetic interference.
HF-275 PUR Servo & Feedback Cable
Cables combining control, signal and power cores are now commonly used in industrial automation. Fine copper wire strands with high performance insulation and sheathing material make them ideal for regular flexing applications. A wide variety of core combinations are manufactured as standard but please call us to discuss your specific needs. We are constantly increasing the standard range and will produce special designs for low minimum order quantities.
Image representative of product style, product supplied may vary.
- Low friction polyurethane sheath for abrasion resistance
- Fleece tapes and talcum to strengthen the core bundle
- High levels of screening
- Wide range of sizes
Profibus DP Cable
A range of single pair Profibus cables for process and field communication in cell networks. The Profibus protocol is widely used for production and process automation applications providing transmission rates up to 12Mbits/sec.
- Suitable for Profibus systems
- Available in PVC, PUR, FEP, LSZH versions
- External duct grade or SWA (steel wire armoured) versions also available
Reviews
There are no reviews yet.