Profibus DP Cable
A range of single pair Profibus cables for process and field communication in cell networks. The Profibus protocol is widely used for production and process automation applications providing transmission rates up to 12Mbits/sec.
- Suitable for Profibus systems
- Available in PVC, PUR, FEP, LSZH versions
- External duct grade or SWA (steel wire armoured) versions also available
The Profibus cable is an alternative to Belden 3079A and is available in PVC, PUR, FEP, (LSHF) low smoke halogen free, external duct grade or SWA (steel wire armoured) versions.
As a cable supplier in the UK, FS Cables offer a wide range of data and bus cables from stock. Please see the navigation menu for more information.
Image representative of product style, product supplied may vary.
Construction
Static Cables
Plain copper conductors 0.64mm (22AWG), foamed PE with a hard skin insulation, synthetic bedding, aluminium foil screen & tinned copper wire braid – 60% optical coverage, thermoplastic or thermosetting sheath.
Dynamic Cables
Plain copper conductors 0.25mm² Foamed PE with a hard skin insulation, cores laid up with fillers and a polyester tape, aluminium foil screen & tinned copper wire braid – 60% optical coverage, polyurethane (PUR) sheath.
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab Emirates| Voltage Rating: | 100V | |
| Temperature Rating: | -40°C to +60°C | |
| Nominal Impedance: | 150 Ohms | |
| Capacitance @ 1hz: | 28.5nF/Km | |
| Velocity of Propagation: | 0.78 | |
| Colour Code: | Red & green | |
| Attenuation: | kHz | dB/1Km |
| 9.6kHz | 2.5dB/Km | |
| 38.4kHz | 4.0dB/Km | |
| 4MHz | 22dB/Km | |
| 16MHz | 42dB/Km |
RELATED PRODUCTS
CAN Bus Cable
CAN Bus (Control Area Network) is a non-addressable system that treats all devices as equal allowing for fast transmission of data. Due to its robust nature, it has been widely adopted in the automotive industry. While all the types listed below are for high flexing automation applications, static versions can also be supplied.
Image representative of product style, product supplied may vary.
- UR sheath for high flexing automation applications
- Distinctive violet jacket
- Fast data transmission across CAN Bus system
DeviceNet Thin Cable
“Thin” cables are designed to connect sensors, actuators and switching to the DeviceNet™ backbone (Thick cable) on the Allen Bradley DeviceNet™ system. Similar in construction to the backbone cable, the “Thin” cable incorporates a power and data pair. Several sheathing options are available for different installation environments. These cables are also referred to as DeviceNet™ Drop cables.
- Power and data pair
- Several sheathing options available
HF-120C-TP Paired Screened Cable
The Hi-Flex twisted pair data cable is ideally suited to mechanically challenging data transmission applications. The tough Polyurethane jacket is cut and abrasion resistant, while being unaffected by many solvents and oils. The tinned copper braid screen copes well with frequent flexing and at the same time maintains signal integrity by minimising the efforts of electromagnetic interference.
Interbus Cable
The Interbus open ring topology allows integration of different field devices from control level down to sensor switches over one system. Unlike traditional ring systems Interbus uses one cable to route data back and forth to all devices. Each device or unit will amplify the signal before sending it on to the next station. The data is transmitted over a 3 pair screened cable. For remote applications a composite data and power cable is available.
Image representative of product style, product supplied may vary.
- PVC jacket for static applications
- PUR version available for flexing applications
- 3 pair or 3 pair + power
PVC Spiral Cable
Belcable offers both signal and power versions of retractable spiral cables. The variations in conductor size, insulation and sheath materials are enormous. Having decided on the conductor size and the number of cores it is important to choose the insulation and sheath materials most suitable for the task. The retracted length of the spiral can be made to your requirements up to 5m.
- Made to order
- Wide range of sizes and core options
Reviews
There are no reviews yet.