Echelon LonWorks 22AWG Cable
Designed for use on industrial and commercial bus systems, these cables have become increasingly popular on Building Management Systems (BMS). Available as one and two pair cables, screened and unscreened in Low Smoke Halogen Free compounds they provide the ideal low cost solution to BUS wiring.
CPR-Compliant options are available for this cable and are indicated in the product table. For the latest information on CPR for Cables, you can visit our dedicated CPR Explained web page. We have created a series of short CPR videos to break down all the significant areas and have updated our ‘CPR for Cables’ guide, available for you to download.
Image representative of product style, product supplied may vary.
- CPR-Compliant options
- For popular Lonworks BMS system
- LSZH jacket ideal for installations in public buildings
Construction
Unscreened Pairs
22(1)AWG plain copper conductors, foam PE insulation, cores twisted into pairs, Low Smoke Halogen Free sheath.
Screened Pairs
22(1)AWG plain copper conductors, foam PE insulation, cores twisted into pairs, overall foil and 22(1)AWG TCu drain wire, Low Smoke Halogen Free sheath.
22(1)AWG plain copper conductors, foam PE insulation, cores twisted into pairs, overall foil and 22(1)AWG TCu drain wire, Low Smoke Halogen Free sheath.
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab Emirates
|
Screened |
||
| Voltage Rating: | 300V | 300V | |
| Temperature Rating: | -5°C +60°C | -5°C +60°C | |
| Conductor Resistance: | 53.0 Ω/km @ 20°C | 53.0 Ω/km @ 20°C | |
| Velocity of Propagation: | 68% | 55% | |
| Capacitance: | |||
| Core to core: | 45pF/m @ 1kHz | 45pF/m @ 1kHz | |
| Nominal Impedance: | 100 Ohms | 100 Ohms | |
| Colour Code: | Blue, White | Blue, White |
CAT - Collective Aluminium Tape
RELATED PRODUCTS
Echelon LonWorks 16AWG Cable
A range of single pair Bus cables is available for the LonWorks system allowing convenient wiring via the Free Topology concept. Due to the popularity of the system for building management applications in the public sector these cables are now stocked in Low Smoke Halogen Free versions. Duct grade and SWA options can also be manufactured for quantities as low as 100m.
HF-120-C Screened Cable
Hi-Flex 120-C screened data cables are designed to last even in the most hostile chain or free movement applications. The HF-120-C copper braid screen protects the signal from EMI while the TPE insulation supports the highly flexible conductors. Abrasion is reduced to a minimum by using a polyurethane low friction sheath. For maximum life Hi-Flex Data cables should not be exposed to torsional stresses or twisting.
HF-120C-TP Paired Screened Cable
The Hi-Flex twisted pair data cable is ideally suited to mechanically challenging data transmission applications. The tough Polyurethane jacket is cut and abrasion resistant, while being unaffected by many solvents and oils. The tinned copper braid screen copes well with frequent flexing and at the same time maintains signal integrity by minimising the efforts of electromagnetic interference.
Interbus Cable
The Interbus open ring topology allows integration of different field devices from control level down to sensor switches over one system. Unlike traditional ring systems Interbus uses one cable to route data back and forth to all devices. Each device or unit will amplify the signal before sending it on to the next station. The data is transmitted over a 3 pair screened cable. For remote applications a composite data and power cable is available.
Image representative of product style, product supplied may vary.
- PVC jacket for static applications
- PUR version available for flexing applications
- 3 pair or 3 pair + power
Modbus Cable
Developed by Modicon, Modbus provides a master/slave communication between intelligent automation devices. Based on Belden 9841, the Modbus cable has an increased jacket thickness to ensure a correct termination into the Modbus connectors.
CPR-Compliant options are available for this cable and are indicated in the product table. For the latest information on CPR for Cables, you can visit our dedicated CPR Explained web page. We have created a series of short CPR videos to break down all the significant areas and have updated our 'CPR for Cables' guide, available for you to download..
Image representative of product style, product supplied may vary.
- CPR-Compliant options
- Suitable for Modbus systems
- PVC, LSZH or external grade versions available
Reviews
There are no reviews yet.