Hi-Flex HF-100C PUR Screened Cable
Abrasion on cables that are constantly flexing is becoming a much more widespread problem. To overcome this, FS Cables have introduced the HF-100 range of polyurethane sheathed cables which will outlast conventional PVC sheathing.
The low friction polyurethane sheath resists wear caused by constant rubbing either in a cable chain or where free movement brings the cable into contact with part of the machine. Suitable for use in cable chains as well as for free movement the HF-100 range will provide a long term solution to many regular flexing applications.
HF-100-C Screened uses fleece tapes and talcum to enable the core bundle and the screening braid to move as the cable flexes. This reduces the stress imposed on the conductors and braid.
Image representative of product style, product supplied may vary.
Construction
Very fine copper wire strands to BS6360 Class 6. Black polyolefin insulation with white numbers. A green/yellow earth core is included in cables with more than 2 cores. Cores twisted in layers & textile taped. Grey PVC inner sheath. Fleece tape. Tinned copper wire braid. Fleece wrap. Textured grey polyurethane outer sheath to RAL 7001.
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab Emirates| Voltage Rating: | |
| Working: | 300/500V |
| Test: | 3000V |
| Temperature Rating: | Flexing: -30°C to +80°C |
| Bending Radius: | Flexing: 5 x cable diameter |
| Current Rating: | Refer to IEE Regs Table 4F3A&B |
| Conductor Stranding: | To BS 6360 Class 6 & VDE 0295 Table 4 |
RELATED PRODUCTS
DeviceNet Thin Cable
“Thin” cables are designed to connect sensors, actuators and switching to the DeviceNet™ backbone (Thick cable) on the Allen Bradley DeviceNet™ system. Similar in construction to the backbone cable, the “Thin” cable incorporates a power and data pair. Several sheathing options are available for different installation environments. These cables are also referred to as DeviceNet™ Drop cables.
- Power and data pair
- Several sheathing options available
Echelon LonWorks 16AWG Cable
A range of single pair Bus cables is available for the LonWorks system allowing convenient wiring via the Free Topology concept. Due to the popularity of the system for building management applications in the public sector these cables are now stocked in Low Smoke Halogen Free versions. Duct grade and SWA options can also be manufactured for quantities as low as 100m.
HF-120 Unscreened Cable
Hi-Flex 120 data cables are designed to last even in the most hostile chain or free movement applications. Abrasion is reduced to a minimum by using a Polyurethane low friction sheath. For maximum life Hi-Flex Data cables should not be exposed to torsional stresses or twisting. Many sizes now available with UL approval.
Image representative of product style, product supplied may vary.
- Low friction polyurethane sheath for abrasion resistance
- Fleece tapes and talcum to strengthen the core bundle
- Wide range of sizes
- For flexing applications
Industrial Ethernet cable
Through the use of Category 5E style cables Industrial Ethernet provides a stable platform for linking automation systems and workstations. They are also suitable for interlinking different Bus protocols such as Profibus and Interbus.
The use of finely stranded conductors and PUR sheathing compounds makes them ideal for frequent flexing and dynamic applications.
Image representative of product style, product supplied may vary.
- Highly flexible
- Finely stranded conductors and PUR sheath
- Ideal for flexing applications
- Cat 5E data rates
- Oil Resistant
Modbus Cable
Developed by Modicon, Modbus provides a master/slave communication between intelligent automation devices. Based on Belden 9841, the Modbus cable has an increased jacket thickness to ensure a correct termination into the Modbus connectors.
CPR-Compliant options are available for this cable and are indicated in the product table. For the latest information on CPR for Cables, you can visit our dedicated CPR Explained web page. We have created a series of short CPR videos to break down all the significant areas and have updated our 'CPR for Cables' guide, available for you to download..
Image representative of product style, product supplied may vary.
- CPR-Compliant options
- Suitable for Modbus systems
- PVC, LSZH or external grade versions available
Reviews
There are no reviews yet.