KNX Cable
The KNX cable from FS Cables (also known as TP1 cable) features two twisted pairs of solid conductor with a foil screen and tinned copper drain wire in a green LSHF jacket. It has been tested and certified as being suitable for use in KNX systems and bears the KNX logo.
- CPR-compliant up to Class Cca s1a, d1, a1
- Certified by the KNX Association
- PVC, LSZH, duct grade & armoured versions
- London Underground (LU) approved version
The LU approved KNX cable has passed the latest London Underground requirements and has been independently tested by the BRE-Global Ltd (Building Research Establishment). It can be identified by the distinctive white stripe over the green sheath.
Many of our KNX cables have been tested for compliance to the Construction Products Regulation (CPR). The 2 pair green KNX cable has been classified to Class Cca s1a, d1, a1.
Also offered is a duct grade, armoured and white version.
KNX systems, formerly known as EIB, allow the operation and control of heating, lighting and air condition among others to be aligned with external climate conditions or adjusted by an interface to pre-set levels.
When you are looking to buy KNX cable, look for the KNX logo. All KNX certified equipment has been tested and certified to meet this high standard and only equipment meeting this can carry the logo. This ensures the quality, reliability and guaranteed compatibility of all KNX devices and equipment.
CPR-Compliant options are available for this cable and are indicated in the product table. For the latest information on CPR for Cables, you can visit our dedicated CPR Explained web page. We have created a series of short CPR videos to break down all the significant areas and have updated our ‘CPR for Cables’ guide, available for you to download.
Image representative of product style, product supplied may vary.
Connects to
- PA220S PACK – BICC Components A2 Gland Pack M20S
- CG/LNM16 – Polyamide Gland Locknut & Washer M16
- CG/SF-16B – SmartFit Cable Gland M16 – Black
- STORM20S – SWA Storm Plastic Armoured Cable Glands M20s
- PBW20S PACK – BICC Components BW Gland Pack M20S
- PCW20S PACK – BICC Components CW Gland Pack M20S
- PE1W20S PACK – BICC Components E1W Gland Pack M20S
- FFMC6 – SWA Firefly Metal Cleat, Cable Dia. 12.6 – 15.7mm
- FFMC6KH – SWA Quick-Fit Keyhole Metal Cleat, Cable Dia. 12.6 – 15.7mm
- FFAMC1220 – SWA Firefly Adjustable Metal Cleat, Cable Dia. 12.7 – 20mm
- TCC01 – Plastic Telecleat 10.5mm-14.5mm
- ACC 10-13 – Aluminium Claw Cleat 10-13mm
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab EmiratesRELATED PRODUCTS
Alternative to Belden 8471 Cable
Rated 0 out of 5
General purpose unscreened single and multipair cables with a small outer diameter, frequently used in audio, bus, data, security and instrumentation applications.
These cables can also be supplied with PE sheaths for running in ducts or in SWA versions for direct burial.
- CPR-Compliant options
- High quality alternative to genuine Belden
- Cut to length required
- LSF or LSZH sheath
Control4 Cable
Rated 0 out of 5
Control4™ lighting control cables available in both PVC and LSZH (Low Smoke Zero Halogen). LSZH gives off significantly less toxic fumes and smoke when burnt compared to traditional PVC, making it a very ideal solution for installations internal installations and near sensitive electronic equipment.
- CPR-Compliant options
- Suitable for Control4 lighting control system
- Suitable for Mode lighting control system
- PVC or LSZH versions
Crestron Cable
Rated 0 out of 5
Designed for use on the popular Crestron lighting control system. Featuring both power and screened control cores, this cable is ideal for commercial and residential lighting and shade control.
- CPR-Compliant options
- Suitable for Crestron lighting control system
- LSZH throughout - insulation and sheath
- Ideal for use in public buildings
Tree Cable & Jumper Wire Designed For Loxone System
Rated 0 out of 5
The Tree Cable has been designed specifically for use on the Loxone system, providing a future proof, all-in-one wiring solution. Stocked on 100m, 200m and 500m reels for next working-day delivery in the UK, free on orders over £100.
- CPR-Compliant options
- Designed for Loxone system
- Green sheath for easy identification
- PVC or LSHF
- 100m, 200m, 500m reels
About us
Belcable is a technical innovative enterprise which integrates with researching, manufacturing and marketing, such as coaxial cables, LAN cables, security cables, Hdmi cables, Tv mounts and brackets etc. Our manufacturing facilities are high-tech and automatic, its annually cables output are 250,000 kms around. Belcable is known to domestic and overseas markets, as its continuously innovative technology, quality products and excellent service.
SOCIAL LINKS
Reviews
There are no reviews yet.