FieldBus Type A Cable
A single pair 18AWG Bi-Directional digital Databus Foundation Fieldbus cable for type A applications (31.25 KBits/sec).
The FS Cables Databus Foundation Fieldbus Type A cable is available in PVC, LSHF and SWA versions.
Image representative of product style, product supplied may vary.
- Suitable for Fieldbus Type A applications
- PVC or LSZH
- External grade versions also available
Construction
Tinned copper conductors 18(7)AWG 0.88mm², polyolefin insulation, aluminium/polyester foil screen, tinned copper drain wire (20AWG) PVC, LSHF or SWA sheath.
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab Emirates| Voltage: | 300V | |
| Operating Temperature: | +60°C | |
| Velocity of Propagation: | 66% | |
| Nominal Impedance: | 100 Ohms | |
| UL Style: | 2493 | |
| Conductor Resistance: | 17.87Ω/km @ 20°C | |
| Nominal Attenuation: | MHz | dB/100m |
| 0.01 | 0.20 | |
| 0.10 | 0.62 | |
| 0.50 | 2.46 | |
| 1.00 | 3.45 |
CAT - Collective Aluminium Tape
RELATED PRODUCTS
CC-Link FieldLink Cable
Developed by Mitsubishi, CC-Link allows high speed communication between controllers and field devices. The CC-Link system is particularly popular in Asia and is used worldwide for time critical applications in conjunction with Mitsubishi Automation products. CC-Link is certified by CLPA and ensures product compatibility.
As a registered member of the CC-Link Partner Association, FS Cables offer a 3 core CC-Link cable for use on the CC-Link system, suitable for data rates up to 10MB/s, in either PVC or SWA (steel wire armoured) versions.
Image representative of product style, product supplied may vary.
- Registered member of the CC-Link Partner Association
- Suitable for data rates up to 10MB/s
- PVC or SWA for external applications
DeviceNet Thick Cable
Designed for use on Allen Bradley DeviceNet™ systems, the “thick” cable construction incorporates a power and data pair for backbone wiring. Several sheathing options are available for different installation environments. These cables are also referred to as DeviceNet™ Trunk cables.
Allen Bradley DeviceNet™ is a Rockwell Automation system supported by ODVA.
Image representative of product style, product supplied may vary.
HF-120C-TP Paired Screened Cable
The Hi-Flex twisted pair data cable is ideally suited to mechanically challenging data transmission applications. The tough Polyurethane jacket is cut and abrasion resistant, while being unaffected by many solvents and oils. The tinned copper braid screen copes well with frequent flexing and at the same time maintains signal integrity by minimising the efforts of electromagnetic interference.
Interbus Cable
The Interbus open ring topology allows integration of different field devices from control level down to sensor switches over one system. Unlike traditional ring systems Interbus uses one cable to route data back and forth to all devices. Each device or unit will amplify the signal before sending it on to the next station. The data is transmitted over a 3 pair screened cable. For remote applications a composite data and power cable is available.
Image representative of product style, product supplied may vary.
- PVC jacket for static applications
- PUR version available for flexing applications
- 3 pair or 3 pair + power
Profibus DP Cable
A range of single pair Profibus cables for process and field communication in cell networks. The Profibus protocol is widely used for production and process automation applications providing transmission rates up to 12Mbits/sec.
- Suitable for Profibus systems
- Available in PVC, PUR, FEP, LSZH versions
- External duct grade or SWA (steel wire armoured) versions also available
Reviews
There are no reviews yet.