FieldBus Type A Cable
A single pair 18AWG Bi-Directional digital Databus Foundation Fieldbus cable for type A applications (31.25 KBits/sec).
The FS Cables Databus Foundation Fieldbus Type A cable is available in PVC, LSHF and SWA versions.
Image representative of product style, product supplied may vary.
- Suitable for Fieldbus Type A applications
- PVC or LSZH
- External grade versions also available
Construction
Tinned copper conductors 18(7)AWG 0.88mm², polyolefin insulation, aluminium/polyester foil screen, tinned copper drain wire (20AWG) PVC, LSHF or SWA sheath.
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab Emirates| Voltage: | 300V | |
| Operating Temperature: | +60°C | |
| Velocity of Propagation: | 66% | |
| Nominal Impedance: | 100 Ohms | |
| UL Style: | 2493 | |
| Conductor Resistance: | 17.87Ω/km @ 20°C | |
| Nominal Attenuation: | MHz | dB/100m |
| 0.01 | 0.20 | |
| 0.10 | 0.62 | |
| 0.50 | 2.46 | |
| 1.00 | 3.45 |
CAT - Collective Aluminium Tape
RELATED PRODUCTS
Echelon LonWorks 22AWG Cable
Designed for use on industrial and commercial bus systems, these cables have become increasingly popular on Building Management Systems (BMS). Available as one and two pair cables, screened and unscreened in Low Smoke Halogen Free compounds they provide the ideal low cost solution to BUS wiring.
CPR-Compliant options are available for this cable and are indicated in the product table. For the latest information on CPR for Cables, you can visit our dedicated CPR Explained web page. We have created a series of short CPR videos to break down all the significant areas and have updated our 'CPR for Cables' guide, available for you to download.
Image representative of product style, product supplied may vary.
- CPR-Compliant options
- For popular Lonworks BMS system
- LSZH jacket ideal for installations in public buildings
FieldBus Type B Cable
A single pair 22AWG Bi-Directional digital Databus Foundation Fieldbus cable for type B applications (31.25 KBits/sec).
The FS Cables Databus Foundation Fieldbus Type B cable is available in PVC, LSHF and SWA versions.
Image representative of product style, product supplied may vary.
- Suitable for Fieldbus Type B applications
- PVC or LSZH
- External grade versions also available
HF-275 PUR Servo & Feedback Cable
Cables combining control, signal and power cores are now commonly used in industrial automation. Fine copper wire strands with high performance insulation and sheathing material make them ideal for regular flexing applications. A wide variety of core combinations are manufactured as standard but please call us to discuss your specific needs. We are constantly increasing the standard range and will produce special designs for low minimum order quantities.
Image representative of product style, product supplied may vary.
- Low friction polyurethane sheath for abrasion resistance
- Fleece tapes and talcum to strengthen the core bundle
- High levels of screening
- Wide range of sizes
Interbus Cable
The Interbus open ring topology allows integration of different field devices from control level down to sensor switches over one system. Unlike traditional ring systems Interbus uses one cable to route data back and forth to all devices. Each device or unit will amplify the signal before sending it on to the next station. The data is transmitted over a 3 pair screened cable. For remote applications a composite data and power cable is available.
Image representative of product style, product supplied may vary.
- PVC jacket for static applications
- PUR version available for flexing applications
- 3 pair or 3 pair + power
KNX Cable
The KNX cable from FS Cables (also known as TP1 cable) features two twisted pairs of solid conductor with a foil screen and tinned copper drain wire in a green LSHF jacket. It has been tested and certified as being suitable for use in KNX systems and bears the KNX logo.
- CPR-compliant up to Class Cca s1a, d1, a1
- Certified by the KNX Association
- PVC, LSZH, duct grade & armoured versions
- London Underground (LU) approved version
Reviews
There are no reviews yet.