KNX Cable
The KNX cable from FS Cables (also known as TP1 cable) features two twisted pairs of solid conductor with a foil screen and tinned copper drain wire in a green LSHF jacket. It has been tested and certified as being suitable for use in KNX systems and bears the KNX logo.
- CPR-compliant up to Class Cca s1a, d1, a1
- Certified by the KNX Association
- PVC, LSZH, duct grade & armoured versions
- London Underground (LU) approved version
The LU approved KNX cable has passed the latest London Underground requirements and has been independently tested by the BRE-Global Ltd (Building Research Establishment). It can be identified by the distinctive white stripe over the green sheath.
Many of our KNX cables have been tested for compliance to the Construction Products Regulation (CPR). The 2 pair green KNX cable has been classified to Class Cca s1a, d1, a1.
Also offered is a duct grade, armoured and white version.
KNX systems, formerly known as EIB, allow the operation and control of heating, lighting and air condition among others to be aligned with external climate conditions or adjusted by an interface to pre-set levels.
When you are looking to buy KNX cable, look for the KNX logo. All KNX certified equipment has been tested and certified to meet this high standard and only equipment meeting this can carry the logo. This ensures the quality, reliability and guaranteed compatibility of all KNX devices and equipment.
CPR-Compliant options are available for this cable and are indicated in the product table. For the latest information on CPR for Cables, you can visit our dedicated CPR Explained web page. We have created a series of short CPR videos to break down all the significant areas and have updated our ‘CPR for Cables’ guide, available for you to download.
Image representative of product style, product supplied may vary.
Only logged in customers who have purchased this product may leave a review.
SALES ENQUIRIES
Belcable's Products have Authorized Dealers in Middle east and United Kingdom.
Kindly Contact them to place Your Order.
CABLES HOUSE Cables & Wires Trading LLC
Cables House Cables & Wires Trading LLC Dubai. United Arab EmiratesRELATED PRODUCTS
CAN Bus Cable
CAN Bus (Control Area Network) is a non-addressable system that treats all devices as equal allowing for fast transmission of data. Due to its robust nature, it has been widely adopted in the automotive industry. While all the types listed below are for high flexing automation applications, static versions can also be supplied.
Image representative of product style, product supplied may vary.
- UR sheath for high flexing automation applications
- Distinctive violet jacket
- Fast data transmission across CAN Bus system
DeviceNet Thin Cable
“Thin” cables are designed to connect sensors, actuators and switching to the DeviceNet™ backbone (Thick cable) on the Allen Bradley DeviceNet™ system. Similar in construction to the backbone cable, the “Thin” cable incorporates a power and data pair. Several sheathing options are available for different installation environments. These cables are also referred to as DeviceNet™ Drop cables.
- Power and data pair
- Several sheathing options available
FieldBus Type A Cable
A single pair 18AWG Bi-Directional digital Databus Foundation Fieldbus cable for type A applications (31.25 KBits/sec).
The FS Cables Databus Foundation Fieldbus Type A cable is available in PVC, LSHF and SWA versions.
Image representative of product style, product supplied may vary.
- Suitable for Fieldbus Type A applications
- PVC or LSZH
- External grade versions also available
Modbus Cable
Developed by Modicon, Modbus provides a master/slave communication between intelligent automation devices. Based on Belden 9841, the Modbus cable has an increased jacket thickness to ensure a correct termination into the Modbus connectors.
CPR-Compliant options are available for this cable and are indicated in the product table. For the latest information on CPR for Cables, you can visit our dedicated CPR Explained web page. We have created a series of short CPR videos to break down all the significant areas and have updated our 'CPR for Cables' guide, available for you to download..
Image representative of product style, product supplied may vary.
- CPR-Compliant options
- Suitable for Modbus systems
- PVC, LSZH or external grade versions available
PUR Screened Spiral Cable
Belcable offers both signal and power versions of retractable spiral cables. The variations in conductor size, insulation and sheath materials are enormous. Having decided on the conductor size and the number of cores it is important to choose the insulation and sheath materials most suitable for the task. The retracted length of the spiral can be made to your requirements up to 5m.
Reviews
There are no reviews yet.